• Code: CC001
• Description: Vendor connection failure
• Causes: Printer control board (PRCB) Coin vendor (Japan) Coin vendor kit (North America, Europe)
• Remedy: 1 Check the vendor connector for proper connection and correct as necessary. - - 2 Check the PRCB connector for proper connection and correct as necessary. - - 3 Change PRCB

• Code: CC151
• Description: ROM contents error upon startup (MSC)
• Causes:
• Remedy: 1 Check the ROM version. - - 2 Rewrite the firmware. - - 3 Replace the appropriate board.

• Code: CC152
• Description: ROM contents error upon startup (Scanner)
• Causes:
• Remedy: 1 Check the ROM version. - - 2 Rewrite the firmware. - - 3 Replace the appropriate board.

• Code: CC153
• Description: contents error upon startup (PRT)
• Causes:
• Remedy: 1 Check the ROM version. - - 2 Rewrite the firmware. - - 3 Replace the appropriate board.

• Code: CC155
• Description: Finisher ROM error
• Causes: DF control board (DFCB)
• Remedy: 1 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 2 Rewrite firmware. - - 3 Change FSCB

• Code: CC156
• Description: ADF ROM error
• Causes: DF control board (DFCB)
• Remedy: 1 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 2 Rewrite the firmware. - - 3 Change DFCB

• Code: CC157
• Description: Finisher ROM error (RU)
• Causes: Transport control board (TRCB) FS control board (FSCB)
• Remedy: 1 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 2 Rewrite the firmware. - - 3 Change TRCB - - 4 Change DFCB

• Code: CC158
• Description: Finisher ROM error (ZU)
• Causes: ZU control board (ZUCB)
• Remedy: 1 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 2 Rewrite the firmware. - - 3 Change ZUCB