Code :

Code: CE001...CE007
Description: CE001: Abnormal message queue CE003: Task error CE004: Event error CE005: Memory access error CE006: Header access error CE007: DIMM initialize error
Causes: Printer control board (PRCB)
Remedy: 1 Check the connectors on PRCB for proper connection and correct as necessary. - - 2 Change PRCB.

Code: CE002
Description: Message and method parameter failure
Causes: MFP board (MFPB) Hard disk
Remedy: 1 Turn OFF the main power switch and turn it ON again, and conduct the following setting. [Service Mode] - [System 1] - [Initialization] - [Data Clear]. . . 2 Format hard disk. . . 3 Change hard disk. . . 4 Change MFPB.

Code: CEEE1
Description: MFP board malfunction
Causes: MFP board (MFPB)
Remedy: 1 Check the connectors on MFPB for proper connection and correct as necessary. - - 2 Change MFPB

Code: CEEE2
Description: Scanner section malfunction
Causes: Exposure unit CCD board (CCDB) Scanner relay board (REYB/SCAN)
Remedy: 1 Correct the connector connection between CCDB and MFPB if faulty. - - 2 Change REYB/SCAN - - 3 Change CCDB

Code: CEEE3
Description: Printer control board malfunction
Causes: Printer control board (PRCB)
Remedy: 1 Check the PRCB connector for proper connection and correct as necessary. - - 2 Change PRCB

Code: CFB00...CFFA0
Description: Abort code
Causes: MFP board (MFPB) DIMM0/DIMM1 JPEG board (SA-502) EIF board (IC-412) DS board (bizhub C652DS/C552DS only)
Remedy: 1 Check the MFPB connector for proper connection and correct as necessary. . . 2 Conduct the following setting. [Service Mode] - [Memory/HDD Adj.] - [Memory Check] - [Detail Check]. When gNGh is displayed, replace the appropriate memory or PWB. WORK0: DIMM0 WORK1: DIMM1 FILE0,1: MFP board FILE2,3: EIF board FILE4,5: DS board . . 3 Conduct the following setting. [Service Mode] - [Memory/HDD Adj.] - [JPEG Check]. When gNGh is displayed, replace the JPEG board (JPEGB; SA-502). . . 4 Change MFPB