Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 1050 — Trang 33/42

Code: SC60-11

Description: When the main power switch (SW1) is ON, a region into which no write was made by the IWS is detected in the DF control program.
Causes: RADF control board (ADFCB) RADF program
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-01

Description: Original registration sensor /Rt (PS306) abnormality.
Causes: Original registration sensor / Rt (PS306)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-02

Description: Original conveyance sensor (PS308) abnormality.
Causes: Original conveyance sensor (PS308)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-03

Description: Original reverse sensor (PS309) abnormality.
Causes: Original reverse sensor (PS309)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-04

Description: Non-volatile memory error
Causes: RADF control board (ADFCB)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-05

Description: Cooling fan /Lt (FM301) abnormality.
Causes: Cooling fan /Lt (FM301)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-06

Description: Original reverse sensor (PS309) abnormality.
Causes: Original reverse sensor (PS309)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-07

Description: Original reverse/exit sensor (PS313) abnormality.
Causes: Original reverse/exit sensor (PS313)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie