Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 1050 — Trang 34/42

Code: SC67-08

Description: Tray up/down motor (M303) abnormality.
Causes: Tray up/down motor (M303)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-09

Description: Original skew sensor /Fr (PS312) abnormality.
Causes: Original skew sensor /Fr (PS312)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-10

Description: Original skew sensor /Rr (PS311) abnormality.
Causes: Original skew sensor /Rr (PS311)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-11

Description: Original registration sensor /Lt (PS318) abnormality.
Causes: Original registration sensor / Lt (PS318)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-12

Description: Mis-centering sensor /Fr (PS320) abnormality.
Causes: Centering sensor /Fr (PS320
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-13

Description: Mis-centering sensor /Rr (PS321) abnormality
Causes: Centering sensor /Rr (PS321)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC67-14

Description: Multi feed sensor /1 (MFS1) abnormality.
Causes: Multi feed sensor /1 (MFS1)
Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

Code: SC76-01

Description: The Stacker tray encoder sensor (PS2) does not turn ON within a specified period of time after the stacker tray up down motor (M1) of the tandem (1st) LS turns ON. Or, the initial operation or the stacker tray down operation is not completed within a specified period of time.
Causes: Stacker tray up down motor (M1) LS control board (LSCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie