Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 1050eP — Trang 11/42

Code: SC32-06

Description: The blowout of a fuse for the pump cooling fan (FM11) in the printer control board (PRCB) is checked. An abnormal condition occurs with the FM11 EM signal a specified period of time after the FM11 is turned ON. This abnormal condition recurs even a specified period of time after the FM11 is turned OFF and then turned ON, and an error detection signal (blowout of a fuse) is detected.
Causes: Pump cooling fan (FM11) Printer control board (PRCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC32-07

Description: The rotation of the pump cooling fan (FM11) is checked. An abnormal condition occurs with the FM11 EM signal a specified period of time after the FM11 is turned ON. This abnormal condition recurs even a specified period of time after the FM11 is turned OFF and then turned ON, and an error detection signal (24V cut off/blowout of a fuse) is not detected.
Causes: Pump cooling fan (FM11) Printer control board (PRCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC32-09

Description: The rotation of the transfer/separation suction fan (FM4) is checked, and the 24V power source is also checked. An abnormal condition occurs with the FM4 EM signal a specified period of time after the FM4 is turned ON. This abnormal condition recurs even a specified period of time after the FM4 is turned OFF and then turned ON, and an error detection signal (24V cut off) is detected.
Causes: DC power supply /1 (DCPS/ 1)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC32-10

Description: The blowout of a fuse for the transfer/separation suction fan (FM4) in the printer control board (PRCB) is checked. An abnormal condition occurs with the FM4 EM signal a specified period of time after the FM4 is turned ON. This abnormal condition recurs even a specified period of time after the FM4 is turned OFF and then turned ON, and an error detection signal (blowout of a fuse) is detected with the 24V normal.
Causes: Transfer/separation suction fan (FM4) Printer control board (PRCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC32-11

Description: The rotation of the transfer/separation suction fan (FM4) is checked. An abnormal condition occurs with the FM4 EM signal a specified period of time after the FM4 is turned ON. This abnormal condition recurs even a specified period of time after the FM4 is turned OFF and then turned ON, and an error detection signal (24V cut off/ blowout of a fuse) is not detected.
Causes: Transfer/separation suction fan (FM4) Printer control board (PRCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC32-12

Description: The rotation of the developing suction fan (FM5) is checked, and the 24V power source is also checked. An abnormal condition occurs with the FM5 EM signal a specified period of time after the FM5 is turned ON. This abnormal condition recurs even a specified period of time after the FM5 is turned OFF and then turned ON, and an error detection signal (24V cut off) is detected.
Causes: DC power supply /1 (DCPS/ 1)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC32-13

Description: The blowout of a fuse for the developing suction fan (FM5) in the printer control board (PRCB) is checked. An abnormal condition occurs with the FM5 EM signal a specified period of time after the FM5 is turned ON. This abnormal condition recurs even a specified period of time after the FM5 is turned OFF and then turned ON, and an error detection signal (blowout of a fuse) is detected with the 24V normal
Causes: Developing suction fan (FM5) Printer control board (PRCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).

Code: SC32-14

Description: The rotation of the developing suction fan (FM5) is checked. An abnormal condition occurs with the FM5 EM signal a specified period of time after the FM5 is turned ON. This abnormal condition recurs even a specified period of time after the FM5 is turned OFF and then turned ON, and an error detection signal (24V cut off/ blowout of a fuse) is not detected.
Causes: Developing suction fan (FM5) Printer control board (PRCB)
Remedy: The main body stops immediately to turn OFF the RL1 (main).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie