• Code: SC67-08
• Description: Tray up/down motor (M303) abnormality.
• Causes: Tray up/down motor (M303)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-09
• Description: Original skew sensor /Fr (PS312) abnormality.
• Causes: Original skew sensor /Fr (PS312)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-10
• Description: Original skew sensor /Rr (PS311) abnormality.
• Causes: Original skew sensor /Rr (PS311)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-11
• Description: Original registration sensor /Lt (PS318) abnormality.
• Causes: Original registration sensor / Lt (PS318)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-12
• Description: Mis-centering sensor /Fr (PS320) abnormality.
• Causes: Centering sensor /Fr (PS320
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-13
• Description: Mis-centering sensor /Rr (PS321) abnormality
• Causes: Centering sensor /Rr (PS321)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC67-14
• Description: Multi feed sensor /1 (MFS1) abnormality.
• Causes: Multi feed sensor /1 (MFS1)
• Remedy: If there is a copy being made, the main body and the DF complete the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC76-01
• Description: The Stacker tray encoder sensor (PS2) does not turn ON within a specified period of time after the stacker tray up down motor (M1) of the tandem (1st) LS turns ON. Or, the initial operation or the stacker tray down operation is not completed within a specified period of time.
• Causes: Stacker tray up down motor (M1) LS control board (LSCB)
• Remedy: The main body stops immediately to turn OFF the RL1 (main).