• Code: SC76-10
• Description: An error detection signal is detected for a specified period of time in succession while the motor cooling fan motor (FM4) of the tandem (1st) LS is ON.
• Causes: Motor cooling fan motor (FM4) LS control board (LSCB)
• Remedy: The main body stops immediately to turn OFF the RL1 (main).

• Code: SC76-11
• Description: An error detection signal is detected for a specified period of time in succession while the paper cooling fan motor /Rr (FM5) of the tandem (1st) LS is ON.
• Causes: Paper cooling fan motor /Rr (FM5) LS control board (LSCB)
• Remedy: The main body stops immediately to turn OFF the RL1 (main).

• Code: SC76-31
• Description: The stacker tray encoder sensor (PS2) does not turn ON a specified period of time after the stacker tray up down motor (M1) of the tandem (2nd) LS turns ON. Or, the initial operation or the stacker tray down operation is not completed within a specified period of time.
• Causes: Stacker tray up down motor (M1) LS control board (LSCB)
• Remedy: The main body stops immediately to turn OFF the RL1 (main).

• Code: SC76-32
• Description: The shift unit home sensor (PS11) does not turn OFF within a specified period of time after the shift unit motor (M5) of the tandem (2nd) LS turns ON. Or, the PS11 does not turn ON within a specified period of time.
• Causes: Shift unit motor (M5) LS control board (LSCB)
• Remedy: The main body stops immediately to turn OFF the RL1 (main).

• Code: SC76-33
• Description: The alignment plate home sensor (PS12) does not turn OFF within a specified period of time after the alignment motor (M7) of the tandem (2nd) LS turns ON. Or, the PS12 does not turn ON within a specified period of time.
• Causes: Alignment motor (M7) LS control board (LSCB)
• Remedy: The main body stops immediately to turn OFF the RL1 (main).

• Code: SC76-34
• Description: The grip conveyance home sensor (PS5) does not turn ON within a specified period of time after the grip conveyance motor (M4) of the tandem (2nd) LS turns ON.
• Causes: Grip conveyance motor (M4)
• Remedy: The main body stops immediately to turn OFF the RL1 (main).

• Code: SC76-35
• Description: The stacker tray upper limit switch (MS2) is ON when the stacker tray up down motor (M1) of the tandem (2nd) LS is in the up operation.
• Causes: Stacker tray up down motor (M1) Stacker tray upper limit switch (MS2)
• Remedy: The main body stops immediately to turn OFF the RL1 (main).

• Code: SC76-36
• Description: The stacker tray lower limit switch (MS3) is ON when the stacker tray up down motor (M1) of the tandem (2nd) LS is in the down operation.
• Causes: Stacker tray up down motor (M1) Stacker tray lower limit switch (MS3)
• Remedy: The main body stops immediately to turn OFF the RL1 (main).