Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 920 — Trang 28/32

Code: SC77-41

Description: After start-up of the tray lift motor /Lw (M202) operation, the tray lower limit sensor /Lw (PS210) does not turn ON within a specified period of time.
Causes: FS control board (FSCB) PI drive board (PIDB) Tray lift motor /Lw (M202) Tray lower limit sensor /Lw (PS210)

Code: SC77-42

Description: After start-up of the tray lift motor /Up (M201) operation, the tray upper limit sensor /Up (PS204) does not turn ON within a specified period of time.
Causes: FS control board (FSCB) PI drive board (PIDB) Tray lift motor /Up (M201) Tray upper limit sensor /Up (PS204)

Code: SC77-43

Description: After the conveyance motor (M203) turns ON, the M203 does not get to the predetermined speed within a specified period of time.
Causes: FS control board (FSCB) PI drive board (PIDB) Conveyance motor (M203)

Code: SC77-44

Description: After the punch shift motor (M802) starts the home position search, the punch shift home sensor (PS803) does not turn ON even when a specified period of time elapses.
Causes: FS control board (FSCB) Punch drive board (PDB)

Code: SC77-47

Description: Communication abnormality between FS-PK.
Causes: FS control board (FSCB) Punch drive board (PDB)

Code: SC77-52

Description: After the 1st stopper motor (M2) starts the home position search, the 1st stopper home sensor (PS3) does not turn ON even when a specified period of time elapses.
Causes: ZU control board (ZUCB) 1st stopper motor (M2) 1st stopper home sensor (PS3)

Code: SC77-53

Description: After the 2nd stopper motor (M3) starts the home position search, the 2nd stopper home sensor (PS4) does not turn ON even when a specified period of time elapses.
Causes: ZU control board (ZUCB) 2nd stopper motor (M3) 2nd stopper home sensor (PS4)

Code: SC77-54

Description: After the punch clutch (CL1) turns on, the punch operation is not completed even when a specified period of time elapses. (The home punch sensor (PS6) does not turn OFF, or does not turn ON after being turned OFF.)
Causes: ZU control board (ZUCB) Punch motor (M4) Punch clutch (CL1) Punch home sensor (PS6)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie