Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 920 — Trang 27/32

Code: SC77-26

Description: After start-up of the folding conveyance motor (M20) operation, the M20 does not get to the predetermined speed within a specified period of time. (FS-604 only)
Causes: FS control board (FSCB) Folding transfer motor (M20)

Code: SC77-31

Description: After start-up of the conveyance motor (M101) operation, the M101 does not get to the predetermined speed within a specified period of time.
Causes: TU drive board (TUDB) Conveyance motor (M101)

Code: SC77-32

Description: After the blade motor (M102) starts the home position detection operation, the blade home switch (MS101) does not turn ON within a specified period of time.
Causes: TU drive board (TUDB) Blade motor (M102) Blade home switch (MS101)

Code: SC77-33

Description: After the stopper motor (M103) starts the home position detection operation, the stopper home sensor (PS103) does not turn ON within a specified period of time.
Causes: TU drive board (TUDB) Stopper motor (M103) Stopper home sensor (PS103)

Code: SC77-34

Description: After the stopper release motor (M104) starts the home position detection operation, the stopper release home sensor (PS104) does not turn ON within a specified period of time.
Causes: TU drive board (TUDB) Stopper release motor (M104) Stopper release home sensor (PS104)

Code: SC77-35

Description: After the press motor (M105) starts the home position detection operation, the press home sensor (PS105) does not turn ON within a specified period of time.
Causes: TU drive board (TUDB) Press motor (M105) Press home sensor (PS105)

Code: SC77-36

Description: After the pusher motor (M107) starts the home position detection operation, the pusher home sensor (PS112) does not turn ON within a specified period of time.
Causes: TU drive board (TUDB) Pusher motor (M107) Pusher home sensor (PS112)

Code: SC77-37

Description: After the holder motor (M106) starts the home position detection operation, the upper limit sensor (PS110) does not turn ON within a specified period of time.
Causes: TU drive board (TUDB) Holder motor (M106) Upper limit sensor (PS110)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie