Description: After start-up of the conveyance motor (M101) operation, the M101 does not get to the predetermined speed within a specified period of time.
Causes: Confirmation of the wiring harness and the connector Confirmation of the trimming conveyance drive parts Conveyance motor (M101) TU drive board (TUDB)
Description: After the blade motor (M102) starts the home position detection operation, the blade home switch (MS101) does not turn ON within a specified period of time.
Causes: Confirmation of the wiring harness and the connector Confirmation of the blade drive parts Blade home switch (MS101) Blade motor (M102) TU drive board (TUDB)
Description: After the stopper motor (M103) starts the home position detection operation, the stopper home sensor (PS103) does not turn ON within a specified period of time.
Causes: Confirmation of the wiring harness and the connector Confirmation of the stopper drive parts Stopper home sensor (PS103) Stopper motor (M103) TU drive board (TUDB)
Description: After the stopper release motor (M104) starts the home position detection operation, the stopper release home sensor (PS104) does not turn ON within a specified period of time.
Causes: Confirmation of the wiring harness and the connector Confirmation of the stopper release drive parts Stopper release home sensor (PS104) Stopper release motor (M104) TU drive board (TUDB)
Description: After the press motor (M105) starts the home position detection operation, the press home sensor (PS105) does not turn ON within a specified period of time.
Causes: Confirmation of the wiring harness and the connector Confirmation of the press drive parts Press home sensor (PS105) Press motor (M105) TU drive board (TUDB)
Description: After the pusher motor (M107) starts the home position detection operation, the pusher home sensor (PS112) does not turn ON within a specified period of time.
Causes: Confirmation of the wiring harness and the connector Confirmation of the pusher drive parts Pusher home sensor (PS112) Pusher motor (M107) TU drive board (TUDB)
Description: After the holder motor (M106) starts the home position detection operation, the upper limit sensor (PS110) does not turn ON within a specified period of time.
Causes: Confirmation of the wiring harness and the connector Confirmation of the holder drive parts Upper limit sensor (PS110) Holder motor (M106) TU drive board (TUDB)
Description: After start-up of the tray lift motor /Lw (M202) operation, the tray lower limit sensor /Lw (PS210) does not turn ON within a specified period of time.
Causes: Confirmation of the wiring harness and the connector Confirmation of the tray /Lw drive parts Tray lower limit sensor /Lw (PS210) Tray lift motor /Lw (M202) PI drive board (PIDB) FS control board (FSCB)
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.