Description: EEPROM Failure
• An EEPROM where no initial data is written is detected.
Remedy: 1 Unplug and plug in the power cord, and then turn off and turn on the copier. 2 Check the EEPROM on the Master Board for proper connection, and correct as necessary. 3 Replace PWB-A. 4 Replace the EEPROM.
Description: HSYNC Detection Failure
• No SOS falling edges are detected within the set period of time after laser emission began while the Polygon Motor is turning. • No SOS falling edges are detected while VIA remains ON.
Remedy: 1 Turn the copier off, then on again. 2 Check PH Unit and the Master Board connectors for proper connection, and correct as necessary. 3 Replace the PH Unit. 4 Replace PWB-A.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.