Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Di552 — Trang 12/15

Code: C13F7

Description: Sub-scanning direction beam position adjustment failure
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the PH Unit. 3. If the same malfunction is detected again, change the PH Unit. 4. If the malfunction is detected a third time, change Image Processing Board.

Code: C13F8

Description: Main scanning direction beam position adjustment failure
Remedy:

Code: C13F9

Description: EEPROM communications error
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the Master Board.

Code: C13FA

Description: LD2 out of correction range
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the PH Unit. 3. If the same malfunction is detected again, change the PH Unit. 4. If the malfunction is detected a third time, change Image Processing Board.

Code: C13FC

Description: APC failure
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the PH Unit. 3. If the same malfunction is detected again, change the PH Unit. 4. If the malfunction is detected a third time, change Image Processing Board.

Code: C1401

Description: IR main routine timeout
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the Image Processing Board.

Code: C1402

Description: IR illegal interrupt vector occurred
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the Image Processing Board.

Code: C1410

Description: IR watchdog
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the Image Processing Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie