Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Magicolor 4650DN — Trang 3/6

Code: 0510

Display: FUSER ERROR
Description: Abnormally low heating roller temperature
• The temperature detected by the thermistor /1 remains lower than the specified value for a given period of time or longer.
Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). 2 Check the fuser unit, DCPU, and MFPB for proper connection and correct as necessary. 3 Change fuser unit. 4 Change MFPB. 5 Change DCPU.

Code: 0520

Display: FUSER ERROR
Description: Abnormally high heating roller temperature
• The temperature detected by the thermistor /1 remains higher than the specified value for a given period of time or longer. • The heater lamp remains ON for a given period of time or longer.
Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). 2 Check the fuser unit, DCPU, and MFPB for proper connection and correct as necessary. 3 Change fuser unit. 4 Change MFPB. 5 Change DCPU.

Code: 0F50

Display: PT SENSOR
Description: OHP sensor malfunction
• It is determined that the OHP sensor is faulty through a check made at the end of the predrive.
Remedy: 1 Check the MFPB connector for proper connection and correct as necessary. 2 PS7 sensor check MFPB PJ15MFPB-5 (ON) C-5. 3 Change MFPB.

Code: 0F52

Display: TE SENSOR Y
Description: Toner level sensor /Y malfunction
• An error occurs on the toner level sensor board (TLSB).
Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB.

Code: 0F53

Display: TE SENSOR M
Description: Toner level sensor /M malfunction
• An error occurs on the toner level sensor board (TLSB).
Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB.

Code: 0F54

Display: TE SENSOR C
Description: Toner level sensor /C malfunction
• An error occurs on the toner level sensor board (TLSB).
Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB.

Code: 0F55

Display: TE SENSOR K
Description: Toner level sensor /K malfunction
• An error occurs on the toner level sensor board (TLSB).
Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change TLSB. 3 Change MFPB.

Code: 13C0

Display: ENGINE H/W ERROR
Description: MFP board malfunction
• A communication error occurs in MFP board (MFPB).
Remedy: 1 Reboot the main body. 2 Change MFPB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie