• Code: C022
• Description: NVRAM error at startup
  • NVRAM error is detected during printer start-up.
• Remedy: 1 Reboot the main body. 2 Check the MFPB/2 connector for proper connection and correct as necessary. 3 Change MFPB/2.

• Code: C025
• Description: Controller ROM error (Configuration information error)
  • Lead error of destination setting file is detected during the printer starting.
• Remedy: 1 Reboot the main body. 2 Check the MFPB/2 connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB/2.

• Code: C026
• Description: Controller ROM error (Access error)
  • Flash ROM access error is detected during the printer starting.
• Remedy: 1 Reboot the main body. 2 Check the MFPB/2 connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB/2.

• Code: C027
• Description: Controller ROM error (Data error)
  • Final check sum error is detected during the printer starting.
• Remedy: 1 Reboot the main body. 2 Check the MFPB/2 connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB/2.

• Code: C050
• Description: HDD access error
  • When correct access to the hard disk kit is failed during access.
• Remedy: 1 Reboot the main body. 2 Check the HDD connector for proper connection and correct as necessary. 3 Check the MFPB/2 connector for proper connection and correct as necessary. 4 Change HDD. 5 Change MFPB/2.

• Code: C051
• Description: HDD full error
  • Range for user space is full during access to the hard disk kit.
• Remedy: 1 Reboot the main body. 2 Delete the job hold in [PS/PCL PRINT] - [PROOF/PRINT MENU] to increase the available range for user space. 3 Check the HDD connector for proper connection and correct as necessary. 4 Format HDD with [SYS DEFAULT MENU] - [HDD FORMAT]. 5 Change HDD. 6 Change MFPB/2.

• Code: C052
• Description: Compact flash access error
  • When correct access to the compact flash card is failed during access.
• Remedy: 1 Reboot the main body. 2 Check the compact flash for proper connection and correct as necessary. 3 Check the MFPB/2 connector for proper connection and correct as necessary. 4 Change compact flash. 5 Change MFPB/2.

• Code: C053
• Description: Compact flash full error
  • Range for user space is full during access to the compact flash card.
• Remedy: 1 Reboot the main body. 2 Delete the job hold in [PS/PCL PRINT] - [PROOF/PRINT MENU] to increase the available range for user space. 3 Check the compact flash for proper connection and correct as necessary. 4 Format HDD with [SYS DEFAULT MENU] - [CARD FORMAT]. 5 Change compact flash. 6 Change MFPB/2.