Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Magicolor 4750DN — Trang 4/5

Code: 3C10

Display: EEPROM2
Description: Trouble related to security
Remedy:

Code: C002

Display: RAM ERROR
Description: RAM error at startup (standard memory)
• RAM error at standard memory is detected during printer start-up.
Remedy: Reboot the main body. 2 Check connection state of the standard/ expanded memory and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 Change the standard/expanded memory. 5 Change MFPB.

Code: C003

Display: RAM ERROR
Description: RAM error at startup (expanded memory)
• RAM error at expanded memory is detected during printer start-up.
Remedy: Reboot the main body. 2 Check connection state of the standard/ expanded memory and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 Change the standard/expanded memory. 5 Change MFPB.

Code: C013

Display: H/W ADDRESS
Description: MAC address error at startup
• Invalid MAC address is detected during printer start-up.
Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 Change MFPB.

Code: C015

Display: BOOT ROM
Description: Boot ROM error at startup
• Boot ROM error is detected during printer startup.
Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 Change MFPB.

Code: C025

Display: CONTROLLER ROM
Description: Controller ROM error (Configuration information error)
• Lead error of destination setting file is detected during the printer starting.
Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB.

Code: C026

Display: CONTROLLER ROM
Description: Controller ROM error (Access error)
• Flash ROM access error is detected during the printer starting.
Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB.

Code: C027

Display: CONTROLLER ROM
Description: Controller ROM error (Data error)
• Final check sum error is detected during the printer starting.
Remedy: 1 Reboot the main body. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie