Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Magicolor 4750DN

Code: 0010

Display: P MOTOR 1
Description: Color PC drum motor malfunction
• The color PC drum motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the color PC drum motor is being rotated.
Remedy: 1 Check the connector between M4-PRCB PJ12 for proper connection and correct as necessary. 2 Check the M4 connector for proper drive coupling and correct as necessary. 3 M4 operation check PRCB PJ12-3 to 6 E-15. 4 Change M4 5 Change PRCB.

Code: 0017

Display: P MOTOR 2
Description: Main motor malfunction
• The main motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the main motor is being rotated.
Remedy: 1 Check the connector between M2-PRCB PJ11 for proper connection and correct as necessary. 2 Check the M2 connector for proper drive coupling and correct as necessary. 3 M2 operation check PRCB PJ11-10 to 13 C-15. 4 Change M2. 5 Change PRCB.

Code: 0018

Display: D MOTOR 2
Description: Developing motor malfunction
• The developing motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the developing motor is being rotated.
Remedy: 1 Check the connector between M1-PRCB PJ11 for proper connection and correct as necessary. 2 Check the M1 connector for proper drive coupling and correct as necessary. 3 M1 operation check PRCB PJ11-3 to 6 B-15. 4 Change M1. 5 Change PRCB.

Code: 004A

Display: DUPLEX FAN
Description: Cooling fan motor malfunction
• The cooling fan motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the cooling fan motor is being rotated.
Remedy: 1 Check the connector between FM11-relay CN29-PRCB PJ10 for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 FM11 operation check PRCB PJ10-5 (REM) PRCB PJ10-7 (LOCK) F-7. 4 Change FM11. 5 Change PRCB.

Code: 004E

Display: POWER FAN
Description: DC power supply fan motor malfunction
• The DC power supply fan motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the DC power supply fan motor is being rotated.
Remedy: 1 Check the connector between FM10-relay CN43-PRCB PJ3 for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 FM10 operation check PRCB PJ3-5 (REM) PRCB PJ3-7 (LOCK) K-10. 4 Change FM10. 5 Change PRCB.

Code: 0062

Display: TRAY3 FEED MOT
Description: Tray 3 media feed motor malfunction
• The motor lock signal remains HIGH for a given period of consecutive time while the media feed motor is being rotated.
Remedy: 1 Check the connector between M1-PCCB PJ3 for proper connection and correct as necessary. 2 Check the connector between PCCB PJ1, PJ2-relay CN53, CN70-PRCB PJ25 for proper connection and correct as necessary. 3 Check the M1 connector for proper drive coupling and correct as necessary. 4 M1 operation check PCCB PJ3-4 to 8 K-2. 5 Change M1. 6 Change PCCB. 7 Change PRCB.

Code: 0094

Display: XFER DETACH 2
Description: 2nd image transfer pressure / retraction failure
• The IDC sensor does not come into the condition where the level detection is available (retracted position = IDC sensor shutter is open) within a given period of time after the 2nd transfer release solenoid has turned ON. • The IDC sensor does not come into the condition where the level detection is not available (pressed position = IDC sensor shutter is closed) within a given period of time after the 2nd transfer release solenoid has turned ON.
Remedy: 1 Check the connector between M2-PRCB PJ11 for proper connection and correct as necessary. 2 Check the M2 connector for proper drive coupling and correct as necessary. 3 Check the connector between IDC-PRCB PJ19 for proper connection and correct as necessary. 4 Check the connector between SD2-relay CN23-PRCB PJ24 for proper connection and correct as necessary. 5 IDC sensor check PRCB PJ19-1 (IDC_D_LEFT) PRCB PJ19-4 (IDC_CTL_LEFT) J-15. 6 SD2 operation check PRCB PJ24-6 (REM) D-7. 7 M2 operation check PRCB PJ11-10 to 13 C-15. 8 Change SD2. 9 Change M2. 10 Change IDC. 11 Change PRCB.

Code: 0096

Display: XFER DETACH 1
Description: 1st image transfer pressure / retraction failure
• The 1st transfer release sensor is not activated (retracted position) within a given period of time after the 1st transfer release solenoid has turned ON. • The 1st transfer release sensor is not deactivated (pressed position) within a given period of time after the 1st transfer release solenoid has turned ON.
Remedy: 1 Check the connector between M2-PRCB PJ11 for proper connection and correct as necessary. 2 Check the M2 connector for proper drive coupling and correct as necessary. 3 Check the connector between PS17-PRCB PJ26 for proper connection and correct as necessary. 4 Check the connector between SD1-relay CN25-PRCB PJ13 for proper connection and correct as necessary. 5 PS17 sensor check PRCB PJ26-3 (ON) I-15. 6 SD1 operation check PRCB PJ13-2 (REM) D-15. 7 M2 operation check PRCB PJ11-10 to 13 C-15. 8 Change PS17. 9 Change SD1. 10 Change M2. 11 Change PRCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie