Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Magicolor 7450 II — Trang 8/10

Code: 13E2

Description: Flash ROM write error
• Flash ROM writing is found faulty during a check.
Remedy: 1 Change PWB-M.

Code: 3000

Description: Main Motor's failure to turn
• The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning.
Remedy: 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PWB-M connector for proper connection and correct as necessary. 4 M1 operation check PWB-M CNDM1-5 (REM) PWB-M CNDM1-8 (LOCK) K to L-2. 5 Change PWB-M. 6 Change PU1.

Code: C002

Description: RAM (standard) error at startup
• RAM error at Standard Memory is detected during printer start-up.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check connection state of the extension memory and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change the extension memory. 5 Change PWB-P.

Code: C003

Description: RAM (option) error at startup
• RAM error at Extension Memory is detected during printer start-up.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check connection state of the extension memory and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change the extension memory. 5 Change PWB-P.

Code: C013

Description: MAC address error at startup (MAC address is invalid)
• Invalid Mac address is detected during printer start-up.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P.

Code: C015

Description: Boot ROM error at startup
• Boot ROM error is detected during printer start-up.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P.

Code: C022

Description: NVRAM access error
• Correct access to NVRAM is failed during the printer starting.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P.

Code: C025

Description: Controller ROM error
• Lead error of destination setting file is detected during the printer starting.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie