• Code: 0048
• Description: Fusing Cooling Fan Motor/2’s failure to turn
  • The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary
• Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M13 operation check PWB-M CNDM1-14 (ON) PWB-M CNDM1-17 (LOCK) K to L-1. 4 Change PWB-M.

• Code: 004C
• Description: Ozone Ventilation Fan Motor’s failure to turn
  • The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary.
• Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M14 operation check PWB-M CNLP-9 (ON) PWB-M CNLP-11 (LOCK) C-11. 4 Change PWB-M.

• Code: 004E
• Description: Power Supply Cooling Fan Motor/1’s failure to turn
  • The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary.
• Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M8 operation check PWB-M CNLV-2 (ON) PWB-M CNLV-3 (LOCK) C-27. 4 Change PU1.

• Code: 004F
• Description: Cooling Fan Motor 2’s failure to turn
  • The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary.
• Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M22 operation check PWB-M CNR2FAN-4 (ON) PWB-M CNR2FAN-6 (LOCK) L-22. 4 Change PWB-M.

• Code: 0094
• Description: 2nd Image Transfer Roller Separation
  • The 2nd Image Transfer Pressure Position Sensor doesn’t turn ON (Retracting) even after the lapse of a given period of time after the 2nd Image Transfer Pressure/Retraction Motor has started rotating during the 2nd Image Transfer Roller is retracting. • The 2nd Image Transfer Pressure Position Sensor doesn’t turn OFF (Pressuring) even after the lapse of a given period of time after the 2nd Image Transfer Pressure/Retraction Motor has started rotating during the 2nd Image Transfer Roller is pressuring.
• Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Change the Right Door Assy 3 Change PWB-M.

• Code: 0096
• Description: Transfer Belt Separation
  • The 1st Image Transfer Pressure/Retraction Position Sensor doesn’t turn ON (Retracting) even after the lapse of a given period of time after the 1st Image Transfer Pressure/Retraction Clutch has turned ON during the Transfer Belt is retracting. • The 1st Image Transfer Pressure/Retraction Position Sensor doesn’t turn OFF (Pressuring) even after the lapse of a given period of time after the 1st Image Transfer Pressure/Retraction Clutch has turned ON during the Transfer Belt is pressuring.
• Remedy: 1 Check the M1 connector for proper connection and correct as necessary. 2 PC6 I/O check, Sensor check 3 CL3 operation check PWB-M CNDM1-11 (ON) K to L-2. 4 M1 operation check PWB-M CNDM1-5 (REM) PWB-M CNDM1-8 (LOCK) K to L-2. 5 Change PWB-M.

• Code: 0301
• Description: Polygon Motor/C failure to turn
  • The Polygon motor fails to turn stably even after the lapse of a given period of time after activating the Polygon motor. • Motor Lock signal detects H for a given period time consecutively during the Polygon motor is rotating.
• Remedy: 1 Check the connector for proper connection and correct as necessary. 2 Change PH Unit. 3 Change PWB-D. 4 Change PWB-M7.

• Code: 0302
• Description: Polygon Motor/M failure to turn
  • The Polygon motor fails to turn stably even after the lapse of a given period of time after activating the Polygon motor. • Motor Lock signal detects H for a given period time consecutively during the Polygon motor is rotating.
• Remedy: 1 Check the connector for proper connection and correct as necessary. 2 Change PH Unit. 3 Change PWB-D. 4 Change PWB-M7.