Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Magicolor 7450 II — Trang 9/10

Code: C026

Description: Controller ROM error
• Flash ROM access error is detected during the printer starting.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P.

Code: C027

Description: Controller ROM error
• Final check sum error is detected during the printer starting.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P.

Code: C050

Description: HDD access error
• When correct access to the Hard Disk Kit is failed during access.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the HDD connector for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change HDD. 5 Change PWB-P.

Code: C051

Description: HDD full error
• Range for user space is full during access to the Hard Disk Kit.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the HDD connector for proper connection and correct as necessary. 3 Change HDD.

Code: C052

Description: Compact Flash access error
• When correct access to the Compact Flash is failed during access.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change Compact Flash. 5 Change PWB-P.

Code: C053

Description: Compact Flash full error
• Range for user space is full during access to the Compact Flash.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Change Compact Flash.

Code: C054

Description: Compact Flash uninstallation
• Compact Flash is not installed while accessing to the Compact Flash.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the Compact Flash for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change Compact Flash. 5 Change PWB-P.

Code: C060

Description: Firmware update error
• Firmware update fails to complete correctly during update.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the cable that has been used for update of the firmware for proper connection and correct as necessary. 3 Update the firmware again. 4 Check the PWB-P connector for proper connection and correct as necessary. 5 Change PWB-P.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie