Code :

Code: 1030
Description: Desk upper lift motor problem
• When the upper cassette of the paper feeder PF-70* is inserted, the desk upper lift limit switch does not turn on within 6 s of the desk upper lift motor turning on and the desk upper lift limit switch does not turn on by turning off the desk upper lift motor for 200 ms and retrying twice. • During printing, the desk upper lift limit switch does not turn on within 200 ms of the desk upper lift motor turning on.s
Causes: Poor contact of the desk upper lift limit switch connector terminals.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable.

Code: 1040
Description: Desk lower lift motor problem
• When the lower cassette of the paper feeder PF-70* is inserted, the desk lower lift limit switch does not turn on within 6 s of the desk lower lift motor turning on and the desk lower lift limit switch does not turn on by turning off the desk lower lift motor for 200 ms and retrying twice. • During printing, the desk lower lift limit switch does not turn on within 200 ms of the desk lower lift motor turning on.
Causes: Broken gears of couplings of the desk lower lift motor. Defective desk lower lift motor. Poor contact of the desk lower lift motor connector terminals. Defective desk lower lift limit switch. Poor contact of the desk lower lift limit switch connector terminals.
Remedy: Replace the desk lower lift motor. Check for continuity across the coil. If none, replace the desk lower lift motor. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Check if CN1-7 on the desk main board goes low when the desk lower lift limit switch is turned off. If not, replace the desk lower lift limit switch. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable.

Code: 1100
Description: Paper deck motor 1 problem
• A motor over-current signal is detected continuously for 1 s or longer.
Causes: Paper deck motor 1 does not rotate correctly (the motor is overloaded). Paper deck motor 1 connector makes poor contact.
Remedy: Check the gears and remedy if necessary. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable.

Code: 1110
Description: Paper deck motor 2 problem
• A motor over-current signal is detected continuously for 1 s or longer.
Causes: Paper deck motor 2 does not rotate correctly (the motor is overloaded). Paper deck motor 2 connector makes poor contact.
Remedy: Check the gears and remedy if necessary. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable.

Code: 1120
Description: Deck right lift position problem • Deck level switch 2 does not turn on within 30 s of paper deck motor 2 turning on.
Causes: Defective deck level switch 2. Poor contact of deck level switch 2 connector terminals. Defective paper deck motor 2. Poor contact of paper deck motor 2 connector terminals. The deck right lift does not rise properly.
Remedy: Check if CN5-4 on the desk main board goes low when desk level switch 2 is turned off. If not, replace desk level switch 2. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Check for continuity across the coil. If none, replace paper desk motor 2. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Check the gears and belts, and remedy if necessary.

Code: 1130
Description: Deck left lift position problem
• Deck level switch 2 does not turn on within 30 s of paper deck motor 2 turning on.
Causes: Defective deck level switch 1. Poor contact of deck level switch 1 connector terminals. Defective paper deck motor 1. Poor contact of paper deck motor 1 connector terminals. The deck left lift does not rise properly.
Remedy: Check if CN5-7 on the desk main board goes low when desk level switch 1 is turned off. If not, replace desk level switch 1. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Check for continuity across the coil. If none, replace paper desk motor 1. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Check the gears and belts, and remedy if necessary.

Code: 1160
Description: Paper feeder PF-70*/PF-75 sequence problem
Causes: Operation start request is sent from the printer to the paper feeder PF-70/PF-75 while paper feed is disabled. Paper feed request is sent from the printer to the paper feeder PF- 70/PF-75 before operation start request.
Remedy: Turn the power off and back on (reset request is sent from the printer to the paper feeder PF-70/PF-75 to cancel operation start request). Turn the power off and back on (reset request is sent from the printer to the paper feeder PF-70/PF-75 to cancel operation start request).

< 1 2 3 4 5 > Last ›