• Code: 38
• Description: Memory Full
• Remedy: The following options are available: • Select Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • Install additional printer memory. • If this does not fix the problem, replace the system board.

• Code: 39
• Description: Complex Page
• Remedy: The page is too complex to print. Options are: • Select Continue to continue. The job may not print correctly. • Cancel the job.

• Code: 50
• Description: PPDS Font Error
• Remedy: • Select Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • If this does not fix the problem, replace the system board.

• Code: 51
• Description: Defective Flash
• Remedy: • Select Continue to clear the message and continue printing. • Install different flash memory before downloading any resources to flash. • If this does not fix the problem, replace the system board.

• Code: 52
• Description: Flash Full
• Remedy: • Select Continue to clear the message and continue printing. Note: Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored in flash memory. • Install a larger capacity flash memory card. • If this does not fix the problem, replace the system board.

• Code: 53
• Description: Unformatted Flash
• Remedy: • Select Continue to clear the message and continue printing. • Format the flash memory before storing any resources on it. If the error message remains, replace the flash memory. • If this does not fix the problem, replace the system board.

• Code: 54
• Description: Serial option <x> error
• Remedy: • Make sure the serial link is set up correctly and the appropriate cable is in use. • Make sure the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and host computer. • Select Continue to clear the message and continue printing. The job may not print correctly. • POR the printer. If this does not fix the problem, replace the PCI card.

• Code: 54
• Description: Std Network Software Error
• Remedy: • Select Continue to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface. • POR the printer. If this does not fix the problem, replace the PCI card.