Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark C752 — Trang 16/18

Code: 956

Description: Service <xxxx> System Board
Remedy: 1 Remove all option boards from the system board. Turn on the printer. Does the error continue? Replace the system board. See “System board”. Go to step 2 2 Replace each option board one at a time, making sure the boards are properly seated. Turn the printer off and then on between each option board to view any error messages. Does the error reappear? Replace the failing option board. Problem fixed.

Code: 957

Description: System Board ASIC Failure
Remedy: Replace the system board.

Code: 958

Description: NAND Failure
Remedy: Replace the system board.

Code: 960

Description: RAM Memory Error
Remedy: RAM soldered on board is bad. Replace the system board.

Code: 961

Description: RAM Memory Error
Remedy: There is an error in the memory installed in the memory option slot on the system board. If another memory option is available, switch the memory options to isolate the problem. If you do not have a spare memory option to switch, then replace the memory installed. If this does not fix the problem, replace the “System board”.

Code: 964

Description: Emulation Error
Remedy: Download emulation CRC failure has occurred. The following actions may be taken: 1. Disable the Download Emulation 2. Program the download emulation into the code overlay SIMM, again. 3. If the problem is not resolved, replace the code overlay SIMM and download emulation, again.

Code: 975

Description: Standard Network or Network Card x
Remedy: Unrecognizable network Errors 975 through 979 indicate a failure with the standard network port located on the system board or a network card in the specified slot x, x=1, 2 or 3. Replace the card in the specified slot.

Code: 976

Description: Standard Network
Remedy: Unrecoverable software or error in network for network card x. If unable to clear the error message, check the following: • If installed, check network card for correct installation. • If correctly installed, replace the network card. • If a network card is not installed, replace the system board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie