Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark C920dtn — Trang 3/13

Code: 53

Description: Unformatted flash detected Self explanatory.
Remedy: Select Continue to clear the message and continue printing. You must format the flash memory before you can store any resources on it. If the error message remains, the flash memory may be defective and require replacing.

Code: 54

Description: Serial option <x> error The printer has detected a serial interface error on a serial port.
Remedy: -Make sure the serial link is set up correctly, and you are using the appropriate cable. -Make sure the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and host computer. -Select Continue to clear the message and continue printing. The job may not print correctly. -Turn the printer off and then on to reset the printer.

Code: 54

Description: Network <x> software error. Standard network software error. The printer cannot establish communications with the specified network port.
Remedy: -Select Continue to clear the message and continue printing. The job may not print correctly. -Program new firmware for the network interface. -Reset the printer.

Code: 55

Description: Unsupported flash option in slot <x> Unsupported option in slot <x>
Remedy: 1. Turn the printer off. 2. Remove the unsupported option. 3. Turn the printer on.

Code: 56

Description: 56 Parallel port <x> disabled 56 Std parallel port disabled Data has been sent to the printer through a disabled parallel port.
Remedy: -Select Continue to clear the message. The printer discards any data received through the parallel port. -Make sure the Parallel Buffer menu item is not set to Disabled.

Code: 56

Description: Serial port <x> disabled. Data has been sent to the printer through a disabled serial port.
Remedy: -Select Continue to clear the message. The printer discards any data received through the serial port. -Make sure the Serial Buffer menu item is not set to Disabled.

Code: 56

Description: USB port <x> disabled Data has been sent to the printer through a disabled USB port.
Remedy: -Select Continue to clear the message. The printer discards any data received through the USB port. -Make sure the USB Buffer menu item is not set to Disabled.

Code: 57

Description: Configuration change, some Held Jobs were lost
Remedy: Select Continue to clear the message.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie