Remedy: • Select Continue to clear the message and continue processing. • Any information not previously stored on the hard disk is deleted. • Delete fonts, macros, and other data stored on the hard disk. • Install a larger hard disk. • If this does not fix the problem, replace the RIP board. See “RIP board removal”.
Remedy: • Select Continue to clear the message and continue printing. • Format the disk. • If the error message remains, replace the hard disk. • If this does not fix the problem, replace the RIP board. See “RIP board removal”.
Remedy: • Select Continue to clear the message and continue printing. • Format the disk. • If the error message remains, replace the hard disk. • If this does not fix the problem, replace the RIP board. See “RIP board removal”.
Remedy: • Select Continue to clear the message and continue printing. • Show Me, View Supplies, and Tell Me More displays additional information. • Order a replacement fuser. When print quality is reduced, install the new fuser using the instruction sheet that comes with the replacement fuser. Note: Be sure to reset the fuser count. • If this does not fix the problem, replace the RIP board.See “RIP board removal”.
Remedy: • Select Continue to clear the message and continue printing. • Show Me, View Supplies, and Tell Me More displays additional information. • Order a replacement fuser. When print quality is reduced, install the new fuser using the instruction sheet that comes with the replacement fuser. Note: Be sure to reset the fuser count. • If this does not fix the problem, replace the RIP board. See “RIP board removal”.
Remedy: • Show Me, View Supplies, and Tell Me More displays additional information. • Replace the fuser. See “Fuser removal”. Note: Be sure to reset the fuser count. • If this does not fix the problem, replace the system board. See “RIP board removal”.
Remedy: Remove power from the printer before continuing or use caution if the product must be energized during this procedure. The heat sink transformer core presents risk of electric shock. Test before touching. • Reinstall the fuser. • Reseat connectors behind fuser. They may get dislodged and not make good contact when the fuser is installed. • Check the cable connectors for damage at the system board and at the LVPS.
Remedy: • Replace the waste toner box using the instruction sheet that comes with the replacement waste toner box. • Ensure that there is no interference between the waste toner box and the printer. • If the problem persists, replace the engine board. See “Engine board (MDCONT) removal”. • If the problem persists, contact your next level of service.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.