Description: Print Incomplete The print carrier stopped before all of the data was used.
Remedy: Clear any carrier jams. Unplug the All-In- One from the wall outlet, wait a few seconds, then plus the All-In-One back in and turn the power on. Resend the print job.
Description: Data Error Incorrect data has been sent from the host computer to the All-In-One.
Remedy: Unplug the All-In-One from the wall outlet; wait a few seconds, then plug the All-In- One back in and turn the power on. If the problem remains, then replace the USB cable. Service: Replace the system board.
Description: Printhead Short The short test detected a short circuit in the printhead.
Remedy: Remove the printhead. Clean and reinstall the printhead. If this does not correct the problem, then replace the printhead. Service: Remove the printhead. Clean and reinstall the printhead. If this does not correct the problem, then replace the printhead.