Remedy: 1. When the state is not recovered even if untreated data is cleared, execute the followings. 2. Check the USB cable. (specifications, cable length, etc.) 3. Replace the main PCB with a new one.
Description: The ambient temperature is outside the permissible temperature range (too low).
Remedy: Adjust the ambient temperature of the printer. To continue operation without changing the ambient conditions, press the [ENTER] key. Operation under the temperature among the guaranteed operation temperature range is recommended.
Description: The ambient temperature is outside the permissible temperature range (too high).
Remedy: Adjust the ambient temperature of the printer. To continue operation without changing the ambient conditions, press the [ENTER] key. Operation under the temperature among the guaranteed operation temperature range is recommended.
Remedy: Set an ink cartridge. It is explained that leaving a state without setting a ink cartridge may cause inability of ink sucking because needles of the slot are dehydrated.