Description: An error was detected in the head connection. (Abnormal voltage was detected)
Remedy: 1. Reconfirm the head temperature with [#TEST] - [TEMPERATURE.CHK] - [NOZZLE TEMP]. In case of recurrence, execute the followings. 2. Make sure that corresponding FPC, main FPC are connected in the right way. 3. Replace the corresponding head with a new one. 4. Replace the ink slider PCB with a new one. 5. Replace the main PCB with a new one.
Description: The printer received some data other than command data.
Remedy: Securely connect the interface cable in position. Use an interface cable conforming to the specifications. 1. When the state is not recovered even if untreated data is cleared, execute the followings. 2. Check the USB cable. (specifications, cable length, etc.) 3. Replace the main PCB with a new one.
Description: Any parameter outside the range of acceptable numeric values was received.
Remedy: 1. When the state is not recovered even if untreated data is cleared, execute the followings. 2. Check the USB cable. (specifications, cable length, etc.) 3. Replace the main PCB with a new one
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.