• Code: 116-737
• Description: Lack of ART user definition
• Causes: When registering the data of user definition (external character fonts, patterns, and so on) by ART, registering is not available due to lack of RAM capacity. Delete it after checking the registered user definition data. Or add memory size.

• Code: 116-738
• Description: Form composition error
• Causes: Composing is not available because the drawing size and direction of form is different from the paper size and direction. Select the paper which is the same size and direction as the registered form.

• Code: 116-739
• Description: Lack of form and logo capacity
• Causes: When registering PLW form and logo data, it is not available to register due to lack of RAM or HDD. With referring the handling manual, delete unnecessary ones after checking the registered form and logos. Or add memory.

• Code: 116-740
• Description: Numeric error
• Causes: Numeric is over the limited value in interpreter. Delete the data because the value over the limit is used in printing data.

• Code: 116-741
• Description: Form registration error
• Causes: When registering the form, it is not available to register due to the limitation of the number of registration. With referring the handling manual, delete unnecessary ones after checking the registered form. Or delete the unnecessary forms by the print command.

• Code: 116-742
• Description: Logo registration error
• Causes: When registering the logo data, it is not available to register due to the limitation of the number of registration. With referring the handling manual, delete unnecessary ones after checking the registered logo. Or delete the unnecessary logos by the print command.

• Code: 116-743
• Description: Form/Logo size over flow
• Causes: The received data (form /logo) is over te registered buffer size. With referring the handling manual, add the memory size of form registration area in the memory setting. Or install HDD.

• Code: 116-745
• Description: ART Command Error
• Causes: An error is caused to ART command. Check the print data, delete the command to cause the error, and execute printing again.