Causes: Detect Top Cover or Top Cover & Rear Cover OpenDefect of SWITCH I/L ASSY, Confirmation of contact/wiring
Code: 001-301
Description: Rear Cover Open
Causes: Detect Rear Cover Open onlyDefect of INTERLOCK S/W REAR, Confirmation of contact/wiring
Code: 001-302
Description: OCT Cover Open
Causes: Detect OCT Cover OpenDefect of SWITCH REAR COVER, Confirmation of contact/wiring
Code: 001-306
Description: Duplex Cover Open
Causes: Detect Duplex Cover OpenDefect of SWITCH DUPLEX, Confirmation of contact/wiring
Code: 001-398
Description: FAN Motor Fail
Causes: One of FAN MAIN or FAN SUB doesn’ t rotate in specified revolutions. Defect and replacement of Fan Main /Fan Sub Disconnection between MCU PWB J24-16 and Fan Main J244B Disconnection between MCU PWB J27-17 and Fan Sub J270B
Code: 003-346
Description: Scope-FD send error detected by Controller(Parity error)
Causes: Communication fails is caused because ACK is not received by resend in twice.Parity error is detected in HARDWARE of IOT side. If the trouble is not recovered by powering OFF and ON, execute the following. - Check the connection of HVPS/MCU connect harness. - If the trouble is still caused, replace HVPS/MCU PWB.
Code: 003-347
Description: Scope-FD send error detected by Controller(Framing error)
Causes: Framing error is caused because ACK is not received by resend in twice. If the trouble is not recovered by powering OFF and ON, execute the following. - Check the connection of HVPS/MCU connect harness. - If the trouble is still caused, replace HVPS/MCU PWB.
Code: 003-348
Description: Send error detected by Controller Detect incorrect command in sending ENOSTR