Code :
- Code: 13DD
- Description: Backup data error
• The printer determines that EEPROM is yet to be mounted when the main power switch is turned ON.
- Causes: Printer control board (PRCB)
- Remedy: 1 Confirm mounting status of EEPROM on the printer control board, and make modification if necessary. - - 2 Change PRCB.
- Code: 13E2
- Description: Flash ROM write error
• Flash ROM writing is found faulty during a check.
- Causes: Printer control board (PRCB) MFP board (MFPB)
- Remedy: 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PRCB. - - 3 Change MFPB.
- Code: 13F0
- Description: Engine control failure
• An undefined malfunction occurs in the engine section (PRCB, etc.).
- Causes: Printer control board (PRCB) MFP board (MFPB)
- Remedy: 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PRCB. - - 3 Change MFPB.
- Code: 3C00
- Description: EEPROM installation error
• Contact the responsible people of OKI when not returning in power switch OFF/ON.
- Causes:
- Remedy: • Contact the responsible people of OKI when not returning in power switch OFF/ON.
- Code: 3C10
- Description: EPROM data error
• Contact the responsible people of OKI when not returning in power switch OFF/ON.
- Causes:
- Remedy: • Contact the responsible people of OKI when not returning in power switch OFF/ON.