Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C110 — Trang 2/3

Code: 0310

Description: Laser malfunction
• The SOS signal is not detected within a predetermined period of time after the output of a laser has been started.
• The SOS signal is never detected in the image area.
Causes: PH Unit Printer control board (PRCB)
Remedy: 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PH unit. - - 3 Change PRCB. - -

Code: 0500

Description: Fuser warm-up failure
• The thermistor does not detect a predetermined temperature value even after the lapse of a predetermined period of time after the current warm-up cycle has been started and the current warm-up cycle is thus not completed.
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Change fuser unit. - - 2 For C110: 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following keys in this order. ROTATE TONER key -ATTENTION key - ATTENTION key - ROTATE TONER key. 4. Main switch is turned OFF/ON. For C130n: 1. Main switch is turned ON. 2. Execute [SERVICE MENU] - [FUSER UNLOCK]. See P.103 - - 3 Change PRCB. - - 4 Change DCPU. - -

Code: 0502

Description: Thermistor open-circuit failure
• The temperature detected by the thermistor does not reach a predetermined level even after the lapse of a given period time after the warm-up cycle has been started.
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). - - 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary. - - 3 Change fuser unit. - - 4 Change PRCB. - - 5 Change DCPU.

Code: 0503

Description: Thermistor resistance failure
• The heater lamp remains ON for a predetermined consecutive period of time.
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Change fuser unit. - - 2 For C110: 1. Main switch is turned ON. 2. Open the top cover. 3. Press the following keys in this order. ROTATE TONER key -ATTENTION key - ATTENTION key - ROTATE TONER key. 4. Main switch is turned OFF/ON. For C130n: 1. Main switch is turned ON. 2. Execute [SERVICE MENU] - [FUSER UNLOCK]. See P.103 - - 3 Change PRCB. - - 4 Change DCPU. - -

Code: 0510

Description: Abnormally low fuser temperature
• The temperature detected by the thermistor remains lower than a predetermined value for a predetermined period of time.
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). - - 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary. - - 3 Change fuser unit. - - 4 Change PRCB. - - 5 Change DCPU.

Code: 0520

Description: Abnormally high fuser temperature
• The temperature detected by the thermistor is a predetermined value or higher for a predetermined period of time.
Causes: Fuser unit Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Check the fuser unit for correct installation (whether it is secured in position). - - 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary. - - 3 Change fuser unit. - - 4 Change PRCB. - - 5 Change DCPU.

Code: 0F51

Description: Waste toner full sensor trouble
• Waste toner full sensor detects abnormal situation
Causes: Waste toner full sensor (PS7) Printer control board (PRCB)
Remedy: 1 Check the PRCB connector for proper connection and correct as necessary. - - 2 PS7 sensor check. - - 3 Change PRCB.

Code: 13C0

Description: Printer control board malfunction
• Communications with the M/C expansion IO G/A (IC on the printer control board) are not properly carried out.
Causes: Printer control board (PRCB)
Remedy: 1 Check the PRCB connector for proper connection and correct as necessary. - - 2 Change PRCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie