Description: Custom Media Type table download failure Failed in downloarding Custom Media Type Table
Remedy: After the power supply is turned on again, try to download again. (Because this processing is not performed during usual operation, it does not occur.)
Remedy: RFID Reader Device error Does the error recur? Check the connection of the LUM board (RFID reader/writer board). Replace the LUM board (RFID reader/writer board). Replace the TB3 board.
Description: RFID Reader I/F Error An interface error was detected with the RFID reader device. 01: communication error between the RFID reader and the engine PCB. 02: the transceiver circuit error of the RFID reader. 03: communication error between the RFID reader and the Tag chip. 04: the RFID Tag detection error (more than 4chips).
Remedy: 01: Same as Error 230. 02: Replace the LUM board (RFID reader/writer board). 03: Check the connection of the antenna cable. 04: Check if the number of RFID Tags is correct.
Description: Abnormal temperature detected by belt thermistor (hightemp or low temp.)
Remedy: Is belt thermistor cable setting proper? Does error reoccur? Connect cable set properly again. Turn power ON again. Replace belt thermistor and leave aside for 30 min. Then turn power ON again.
Remedy: The ID motor does not rotate correctly. Is the error message displayed when the power is turned on again? Check if the ID unit is set correctly. Replace the ID unit. Replace the ID motor.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.