Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C3400n — Trang 2/7

Code: 042, 043, 045

Display: Service call 042: Error 043: Error
Description: Flash File System Error
It failed to the access to CU Flash ROM that is attached to the BLA board directly.
Remedy: Replace TB3 board

Code: 052

Display: Power off/on 052:Error
Description: DMA Abort Error detected in Image processor.
Remedy: Does error reoccur? Power OFF/ON. Replace TB3 board.

Code: 070

Display: Power off/on 070:Error
Description: PSE firmware fault detected.
Remedy: Does error reoccur? Power OFF/ON. Replace TB3 board.

Code: 072

Display: Service call 072: Error
Description: Engine I/F Error I/F Error between PU and CU
Remedy: Replace TB3 board

Code: 073

Display: Service call 073: Error
Description: Video Error When the image data sprads, defect is detected. (Incorrect data receive)
Remedy: Does the error recur? Change the PC to high spec or lower the resolution, and then print again. Replace TB3 board

Code: 074, 075

Display: Service call 074: Error 075: Error
Description: Video Error When the image data spreads, defect is detected.
Remedy: Replace TB3 board

Code: 081

Display: Service call 081: Error
Description: Difference between version of CU firm and EEPROM
Remedy: Do EEPROM Initialization. (Turn on the power supply by Coveropen & pressing ONLINE switch & pressing CANCEL switch). Because the Mac address will disappear with this initialization, please reset Mac address by using the maintenance utility. Replace TB3 board

Code: 104

Display: Service call 104: Error
Description: Engine EEPROM mounting check is OK with turning on the power supply, after that, lead/ light error is detected
Remedy: Power supply OFF/ON Replace TB3 board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie