Mã lỗi OKI C7550 — Trang 8/10
Code:
Tất cả lỗi (79)
-
-
-
001 ... 011
020
030
031
032
035
036
037
040
041
042 ... 044
048
049
050
051
063
065
070
072
073 ... 075
102
103
104
105
106
107
110 ... 116
120
121
122
123
124
125
126
130
131, 132, 133, 134
140, 141, 142, 143
150, 151, 152, 153
154
155
160, 161, 162, 163
170, 171, 174, 175
172, 176
173, 177
179
180 ... 186
187
310
320
321
323
324
325
326
330
330 ... 343
350, 351, 352, 353
354
355
356
360
370
371
372
380
381
382
383
389
390
391 ... 395
400
410, 411, 412, 413
480
490
491 ... 495
Display: Open/close cover 326: Paper thickness error
Description: U-Heavy mode media detect value out of range.
Remedy: Is different media type mixed in? Remove foreign objects.
Display: Reset belt 330: Belt error
Description: Same unit not detected upon power ON or closing cover.
Remedy: 1) Is error message displayed? 2) Is belt unit set properly? 3) Does error reoccur? Check set condition of belt unit. Reset belt unit and turn power ON again. Replace belt unit assembly.
Display: Reset drum 330~343: Drum error
Description: Same as above.
Remedy: 1) Is error message displayed? 2) Is image drum set properly? 3) Does error reoccur? Check set condition of ID. Turn power ON again. Replace ID unit assembly.
Display: Set new drum 350: Yellow drum life 351: Magenta drum life 352: Cyan drum life 353: Black drum life
Description: ID unit life.
Remedy: Right after replacing ID unit? Check ID unit life. Replace ID unit.
Display: Set new fuser 354: Fuser life
Description: Fuser life (occurs when fuser life continuation is OFF).
Remedy: Right after replacing fuser? Check fuser life. Replace fuser.
Display: Set new belt 355: Belt life
Description: Belt life notified (alarm). Print N-count by opening and closing cover.
Remedy: Right after replacing belt? Check belt life. Replace belt.
Display: Set new belt 356: Belt life
Description: Waste toner belt life notified (alarm). Print N-count by opening and closing cover. N=20
Remedy: Right after replacing belt? Check belt life. Replace belt.
Display: Set duplex unit 360: Duplex unit is open.
Description: When duplex unit is removed from printer.
Remedy: Does error recover by resetting duplex unit? Normal. Replace duplex unit or engine board.