Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI C9300 — Trang 6/12

Code: 125

Display: Service Call 125: Error
Description: Error detected at MT home position.
Remedy: 1) Is error message displayed? 2) Does error reoccur?
Turn ON power again. Replace MT.

Code: 126

Display: Turn power OFF and wait 126: Dew error
Description: Sensor dew error.
Remedy: Sensor dew error detected. Turn ON power after a while.

Code: 127

Display: Service Call 127: Error
Description: Error detected at the fuser unit cooling fan.
Remedy: 1) Does the fuser unit cooling fan operate? 2) Does the error repeat after fuser unit cooling fan replacement?
Replace the fuser unit cooling fan. Replace the engine control PWB (K7N). Replace the engine control PWB (K7N).

Code: 130

Display: Service Call 130: Error
Description: Temperature rise detected at LED head.
Remedy: 1) Is error message displayed? 2) Does error reoccur?
Leave alone for 30 min. Turn power OFF. Leave for 30 min., then turn power ON. Replace LED head.

Code: 131 ... 134

Display: Service Call 131: Y Head 132: M Head 133: C Head 134: K Head
Description: Same unit not detected upon power ON or opening cover.
Remedy: 1) Is error message displayed? 2) Is LED head properly set? 3) Does error reoccur?
Confirm that LED head is set properly. Turn power ON again. Replace LED head assembly.

Code: 140 ... 143

Display: Service Call 140: Y ID 141: M ID 142: C ID 143: K ID
Description: Error detected at proper ID position.
Remedy: 1) Is error message displayed? 2) Does error reoccur?
Turn power ON again. Replace drum contacct assembly.

Code: 150 ... 153

Display: Service Call 150: Y 151: M 152: C 153: K
Description: When a fuse could not be disconnected in the ID unit.
Remedy: Is ID unit set properly? Check cable connections and replace engine board.

Code: 154 ... 155

Display: Service Call 154: Error Service Call 155: Error
Description: When belt unit fuse cannot be disconnected. When fuser unit fuse cannot be disconnected.
Remedy: Is belt unit set properly? Is fuser unit set properly?
Check cable connections and replace engine board. Check cable connections and replace engine board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie