Remedy: 1) Does fuser match with model and power voltage? 2) Error reoccurs after setting fuser properly. Set proper fuser. Check if fuser is set properly. Replace fuser.
Description: Communication disability with option unit detected by engine. 180: Envelope Feeder ( Not used ) 181: Duplex unit 182: Tray2 unit 183: Tray3 unit 184: Tray4 unit 185: Tray5 unit 186: Finisher unit
Remedy: Is the error message displayed sgin? Check the connector between the printer and the unit, and reinstall the unit.
Description: Error occurered while writing over the PU firmware. ( This does not occur at user level. ) Turn the printer OFF/ON, and retry to download the PU firmware, again.
Remedy: Turn the printer OFF/ON, and retry to download the PU firmware, again. Usually, the procedure ( PU firmware download ) which isn’t done.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.