Description: Buffer roller drive motor abnormality
Remedy: MJ-1101 Is there any mechanical problem when the buffer roller is rotated? → →YES Fix the drive mechanism. NO Is the harness between the buffer roller drive motor (M6) and the finisher control PC board (CN18) disconnected or open circuited? l → →YES • Reconnect the connector securely. • Replace the harness. NO 1) Replace the buffer roller drive motor (M6). 2) Replace the finisher control PC board.
Remedy: MJ-1022 Rotate the delivery roller by hand. Does it rotate smoothly? → NO → Fix the mechanism. YES Is the wiring between the finisher controller PC board and delivery motor (M1) correct? → NO → Correct the wiring. YES Is the delivery motor clock sensor (S1) working properly? → NO → Replace the sensor. YES 1) Replace the delivery motor. 2) Replace the finisher controller PC board.
Remedy: MJ-1023/1024 Are the tray 1 shift area sensors 1-3 and tray 2 shift area sensors 1-3 normal? → NO → Replace the tray 1/2 shift area sensor boards. YES Are the wirings between the finisher controller PC board and the tray 1/2 shift motors (M37/ M38) correct? → NO → Correct the wirings. YES Is there any problem with the tray lift mechanism? → NO → Fix the lift mechanism. YES 1) Replace the tray 1/2 shift motors. 2) Replace the finisher controller PC board.
Remedy: MJ-1101 Is there any mechanical problem when the movable tray is moved? → →YES Fix the mechanism. NO Is the harness between the movable tray shift motor (M7) and the finisher control PC board (CN8) disconnected or open circuited? l → →YES • Reconnect the connector securely. • Replace the harness. NO Is there a disconnection of the connector, incorrect installation or breakage of the movable tray position A, B, and C sensors (S13, S14, and S15)? l → →YES • Replace the harness. • Reinstall the sensor correctly. • Replace the sensor. NO 1) Replace the movable tray shift motor (M7). 2) Replace the finisher control PC board.
Remedy: MJ-1101 Is there any mechanical problem when the actuator of the movable tray paper-full detion sensor (S17) is moved? → →YES Fix the mechanism. NO Is there a disconnection of the connector, incorrect installation or breakage of the movable tray paper-full detion sensor (S17)? ll → →YES • Connect the connector securely. • Reinstall the sensor correctly. • Replace the sensor. NO Is the harness between the movable tray paper-full detion sensor (S17) and the finisher control PC board (CN13) disconnected or open circuited? l → →YES • Reconnect the connector securely. • Replace the harness. NO Replace the finisher control PC board.
Description: Rear aligning plate motor abnormality
Remedy: MJ-1023/1024 Is the rear aligning plate home position sensor (PI37) normal? → NO → Correct the wiring. YES Is there any mechanical problem with the path of aligning plate? → NO → Fix the mechanism. YES 1) Replace the rear aligning plate motor. 2) Replace the finisher controller PC board.
Remedy: MJ-1101 Is there any mechanical problem when the front alignment plate is moved? → →YES Fix the mechanism. NO Is the harness between the front alignment motor (M9) and the finisher control PC board (CN10) disconnected or open circuited? l → →YES • Reconnect the connector securely. • Replace the harness. NO Replace the front alignment motor (M9).
Remedy: MJ-1022/1023/1024 Is the wiring between the stapler and finisher controller PC board correct? → NO → Correct the wiring. YES 1) Replace the stapler. 2) Replace the finisher controller PC board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.