Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI CX4545 MFP — Trang 5/18

Code: C5A0

Description: SRAM board not connected (LGC board). SRAM board data abnormality (LGC board)
Causes: SRAM board LGC board
Remedy: SRAM board • Connector check (CN170) • Board check LGC board • Connector check (CN363) • Board check

Code: C5A1

Description: SRAM board data abnormality (LGC board)
Causes: SRAM board LGC board
Remedy: SRAM board • Connector check (CN170) • Board check LGC board • Connector check (CN363) • Board check

Code: C8E0

Description: RADF communication protocol abnormality. The system has to be stopped because the control abnormality occurred.
Causes: RADF board
Remedy: Power Turn the power OFF and then back ON to check if the equipment operates normally. RADF board • Connector check • Board check

Code: C900

Description: Connection error between the SYS board and the LGC board
Causes: LGC board IMG board SYS board
Remedy: LGC board • Connector check (CN354) • Board check IMG board • Connector check (CN422, CN423) • Board check SYS board • Connector check (CN135) • Board check

Code: C901

Description: System format error for scanner
Causes: LGC board IMG board SYS board
Remedy: Main power switch Does service call still occur even after turning OFF the main power switch then back ON? SLG board • Connector check (CN12) • Board check SYS board • Connector check (CN135) • Board check

Code: C910

Description: Toner cartridge IC chip access board abnormality. Abnormal access between the CTRG board and LGC board
Causes: Toner cartridge LGC board HRNS-LGC-TNRIC-140 CTIF board HRNS-TNRIC-140
Remedy: 1 Does the non-genuine toner cartridge display appear when the front cover is opened and closed? Yes Use the genuine toner cartridge. 2 No 2 2 Toner cartridge • Check the phenomenon by removing the toner cartridges (Y, M, C and K) and reinserting them. • Check that the CTRG board of each cartridge (Y, M, C and K) is installed properly. 3 Contact point on the equipment side Check that the spring of the contact point for each color (Y, M, C and K) is not deformed. 4 Is the spring of the contact point returned when it is pushed lightly? Yes No • Check that the CTIF board is installed properly. • Board check 7 Notes: The spring of the contact point may be released if you push the toner cartridge all the way in when an abnormality occurs. 5 LGC board • Connector check (CN364) • Board check 6 HRNS-LGC-TNRIC-140 • Relay connector check (J556, J557, J558, J559) • Harness check 7 CTIF board for each color (Y, M, C and K) • Check that the board is installed properly. • Board check 8 HRNS-TNRIC-140 for each color (Y, M, C and K) • Connector check • Harness check

Code: C911

Description: Toner cartridge IC chip access board abnormality (caused by factors other than C910). Abnormal access between the CTRG board and LGC board (High possibility of failure except the LGC board)
Causes: Toner cartridge LGC board HRNS-LGC-TNRIC-140 CTIF board HRNS-TNRIC-140
Remedy: 1 Does non-genuine toner cartridge display appear when the front cover is opened and closed? Yes Use the genuine toner cartridge. 2 No 2 2 Toner cartridge • Check the phenomenon by removing the toner cartridges (Y, M, C and K) and reinserting them. • Check that the CTRG board of each cartridge (Y, M, C and K) is installed properly. 3 Contact point on the equipment side Check that the spring of the contact point for each color (Y, M, C and K) is not deformed. 4 Is the spring of the contact point returned when it is pushed lightly? Yes No • Check that the CTIF board is installed properly. • Board check 7 Notes: The spring of the contact point may be released if you push the toner cartridge all the way in when an abnormality occurs. 5 LGC board • Connector check (CN364) • Board check 6 HRNS-LGC-TNRIC-140 • Relay connector check (J556, J557, J558, J559) • Harness check 7 CTIF board for each color (Y, M, C and K) • Check that the board is installed properly. • Board check 8 HRNS-TNRIC-140 for each color (Y, M, C and K) • Connector check • Harness check

Code: C940

Description: Engine-CPU abnormality
Causes: LGC board
Remedy: Main power switch Turn OFF the main power switch, then back ON. Engine-CPU, FROM, and SRAM Check if the conductor pattern between the Engine-CPU, FROM, and SRAM is short circuited or open circuited. LGC board Board check
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie