Mã lỗi OKI ES6405
Code:
Tất cả lỗi (55)
-
-
-
002, 007, 009, 011
020
030
031
040
041
042, 043, 045
072
073
074, 075
081
104
106
111
112
113
121
122
123
124
126
127
128
131 ... 134
142
150 ... 153
154
155
160 ... 163
167
168
170, 171
172, 173
174
175
176, 177
181, 182, 183
190
200, 202
203 ... 214
209
230
231
901 ... 904
918
923
928
980
982
983
984 ... 987
F0C, FFF
Code:
-
Display: WDT ERROR R14=xxxx
Description: PU firmware runaway
Remedy: Does this error recur? Yes Turn on the power again. Replace the CU/ PU board.
Code:
-
Display: COMMUNICATION ERROR
Description: I/F error between PU and CU
Remedy: Is the CU/PU assembly installed normally? Does this error recur? Re-install the CU/PU assembly normally. Replace the CU/ PU board.
Code:
-
Display: ASIC ERROR
Description: DCON access error
Remedy: Does this error recur? Yes Replace the CU/ PU board.
Display: Restart the printer. 002: Error - 007: Error 009: Error - 011: Error
Description: CPU Exception
Remedy: If the RAM DIMM is installed, remove it and turn off the power of the printer and back on. Replace the CU/PU board. Re-install the RAM DIMM. Replace the RAM DIMM.
Display: Service call 020: Error
Description: CU ROM Hash Check Error
Remedy: Turn off the power of the printer and back on. Replace the CU/PU board.
Display: Service call 030: Error
Description: CU RAM Check Error
Remedy: Turn off the power of the printer and back on. Replace the CU/PU board.
Display: Service call 031: Error
Description: CU Optional RAM Check Error
Remedy: Is installation of the RAM DIMM normal? Does the printer recover from the error when the RAM DIMM is replaced? Re-install the RAM DIMM. Replace the RAM DIMM. Replace the CU/PU board.
Display: Service call 040: Error
Description: CU EEPROM Error
Remedy: Turn off the power of the printer and back on. Replace the CU/PU board.