Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI ES8431 — Trang 10/11

Code: 941

Display: Power off/on 941: Error
Description: A watch dog timer error was detected.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 942

Display: Power off/on 942: Error
Description: An undefined interruption was detected.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 943

Display: Power off/on 943: Error
Description: PU CPU ran away out of control due to noise etc.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 944

Display: Power off/on 944: Error
Description: Dcon circuit access failed.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 945

Display: Power off/on 945: Error
Description: SDRAM access at power on failed.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.

Code: 980

Display: Power off/on 980: Error
Description: An abnormal temperature of the fuser unit was detected.
Remedy: Does this error recur? Yes Cycle the power. Replace the fuser unit.

Code: 982

Display: Service call 982: Error
Description: Excessive trays beyond the specification are installed.
Remedy: Are many trays beyond the specification installed? Yes Use trays as many as specified.

Code: 983

Display: Service call 983: Error
Description: More than one toner cartridge tag of the same color was detected.
Remedy: Does this error recur? Yes Cycle the power. Replace the CU/ PU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie