Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MPS5501b

Code: 042, 043, 045

Description: Flash File System Error
Failed access to Flash set directly on PU/CU board.
Remedy: Run forced initialization of Flash.(Note that NIC- F/W and Mac address is deleted.After the initialization,it is need to download NIC-F/W and / or Mac address by Maintenance utility.)Press"+”,"- ”,"CAN-CEL”to turn power ON . Replace the PU/CU board if symptom does not change.

Code: 049

Description: LED head type (resolution) error
LED Head type was mismatched with CU and Engine.
Remedy: 1) Replace the PU/ CU board with the one for the proper head. 2) Replace with a head of proper resolution.

Code: 051

Description: CU Fan Error Abnormal CPU cooling fan on PU/ CU board.
Remedy: Connect Properly. Replace fan. Replace the PU/ CU board.

Code: 052

Description: DMA Abort Error detected in Image processor.
Remedy: Power Off/On. Replace the PU/ CU board.

Code: 067

Description: SleepMode Interface Monitor I/F error with CU F/W.
Remedy: Power Off/On. Replace the PU/ CU board.

Code: 069

Description: The NIC device had not worked correctly.
Remedy: Power Off/On Replace the PU/ CU board.

Code: 070

Description: PSE firmware fault was detected.
Remedy: Power Off/On. Replace the PU/ CU board.

Code: 072

Description: Engine I/F error between PU-CU.
Remedy: Power Off/On. Replace the PU/ CU board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie