Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI MPS5501b — Trang 6/8

Code: 231

Description: Tag Interface Error
05: K reader (TC/ID) - Tag interface connection error
11: K reader (TC/ID) - Tag interface connection error
Remedy: 05, 11: Does error reoccur? Does error reoccur after the power restoration? Is the Tag cable connected properly? Does error reoccur after the power restoration?
Replace the toner cartridge, ID or Print Cartridge. Check the Tag cable. Connect the cable properly. Replace the PU/ CU board.

Code: 250

Description: Secure File Erasing Error
Remedy: Did the user accept to execute Erase HDD? Inform the user that it is necessary to execute Disk ERASE to restore the HDD defaults in order to delete the encrypted file.

Code: 251

Description: Secure Disk Erasing Error
Remedy: Error occurred during Disk ERASE. Does error reoccur? Power Off/On. Yes Replace the HDD.

Code: 254

Description: An unexcepted error occurred during initializing the security mode. Error cause information was displayed after an error number.
Remedy: Does error reoccur? Yes Power Off/On. Regenerate an encryption key. If it doesn’t solve the problem, replace the PU/CU board or encrypted HDD.

Code: 257

Description: An unexcepted error occurred during initializing HDD. HDD Error cause information was displayed after an error number.
Remedy: Does error reoccur? Yes Power Off/On. Format the HDD again. If it does not solve the problem, replace the HDD.

Code: 901, 902

Description: Short or open in Internal thermistor detected.
Remedy: Is internal thermistor cable setting proper? Does error reoccur?
Connect cable set properly again. Turn power ON again. Replace the internal thermistor.

Code: 903, 904

Description: Abnormal temperature detected by Internal thermistor (high-temp or low temp.)
Remedy: Is internal thermistor cable setting proper? Does error reoccur?
Connect cable set properly again. Turn power ON again. Replace the internal thermistor and leave aside for 30 minutes. Then turn power ON again.

Code: 911, 912

Description: The Geared Motor Error at the Optional Tray. 911:Tray2 912 Tray3
Remedy: Is the indicated tray installed properly? Does error reoccur?
Install the optional tray properly. Turn power ON again. Replace the Geared Motor of indicated tray.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie