Các lỗi thường gặp

Code :
  • Code: -
  • Display: WDT ERROR R14=xxxx
  • Description: PU firmware runaway
  • Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
  • Code: -
  • Display: ASIC ERROR
  • Description: CU board (CU) DCON access error * DCON clock output abnormity
  • Remedy: Does this error recur? Turn on the power again. Replace the CU board. Replace the PU board.
  • Code: -
  • Display: SDRAM ERROR
  • Description: CU board (CU) DCON access error * RAMRD/WR abnormity for VIDEO
  • Remedy: Does this error recur? Turn on the power again. Replace the CU board. Replace the PU board.
  • Code: -
  • Display: ABORT xxx = xxxxxxxx
  • Description: PU firmware runaway
  • Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
  • Code: -
  • Display: IRQXX_IPT
  • Description: PU firmware runaway
  • Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
  • Code: 001
  • Display: Contact the Service center. 001: Error
  • Description: Machine Check Exception
  • Remedy: Replace CU board
  • Code: 002 ... 007
  • Display: Reboot the printer. 002: Error ~ 007: Error
  • Description: CPU Exception
  • Remedy: Does the error display recur? If the RAM DIMM is installed, remove it and turn off the power of the printer and back on. Replace the CU board. Re-install the RAM DIMM. Replace the RAM DIMM.
  • Code: 020
  • Display: Contact the Service center. 020: Error
  • Description: CU ROM Hash Check Error
  • Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU
 1 2 3 4 >  Last ›
popup

Số lượng:

Tổng tiền:

Danh mục