Display: Contact the Service center. 200: Error - 202: Error
Description: PU Firmware Download Error
Remedy: Error has occurred during rewriting of the PU firmware. After turning on the power again, perform downloading again. (This error does not occur during the normal operation because this processing is not carried out.)
Description: CU program error (The error numbers 203 through 214 do not occur under the normal operation.) Illegal processing is executed by the CU program.
Remedy: Illegal processing is executed by the CU program. After turning off the power, check the normal connection between CU board and PU board. Then, turn on the power again.
Description: Custom Media Type table downloading has failed.
Remedy: Custom Media Type table downloading has failed. After turning on the power again, perform downloading again. (This error does not occur during the normal operation because this processing is not carried out.)
Remedy: RFID read device error Does this error recur? Check the normal connection of RFID R/W board. Replace the RFID R/W board. Replace the P6X board.
Description: RFID reader I/F error Interface error with the RFID reader is detected. 01: Communication error between the RFID reader and the engine circuit boards. 02: Error in the wireless circuit of the RF ID reader 03: Communication error between the RFID reader and the tag chip. 04: Error is detected in the RFID tag chip. (In more than 4 chips)
Remedy: 01: Same as the error no. 230 02: Replace the RFID R/W board. 03: Check for normal connection of the antenna cable. 04: Check if quantity of the RFID Tag is correct or not.
Description: The erasing error of encrypted file has been detected.
Remedy: Has the User known that HDD ERASE is performed? Yes Inform the User that it is necessary to perform Disk ERASE and revert the HDD as the purchasing status in order to delete the encrypted file. (ADMIN MENU HDD ERASE)