Description: When turning ON the power, failed to detect the EEPROM (presence).
Remedy: Is there an EEPROM? Does the Error take place again? Check to see if there is an EEPROM. If not, mount an EEPROM. Mount the EEPROM. Replace engine control PCB (S2X).
Description: An optional unit for another model was detected. 111: Duplex unit 112: 2nd Tray 113: 3rd Tray 114: 4thTray 115: 5th Tray 116: Finisher 117: Inverter
Remedy: Is the proper optional unit for that model mounted? Mount the proper optional unit. Check the connection. Then turn ON the power again. Replace the unit if operations is not restored.
Remedy: 1) Is the PU PCB high voltage power cable properly connected? Connect properly Check to see if there is any contact-defects in the high voltage system. Replace High Voltage Power Unit