Description: Engine FAN Motor Error Error was detected in each fan. 01: Fuser FAN Error 02: Power FAN Error 03: PU Motor FAN Error 04: Belt FAN Error 05: IDFAN Error 06: Top Cover FAN Error
Remedy: Is the applicable location of the fan connection normal? If the condition does not change Replace fan.
Display: Service Call 131: Y Head 132: M Head 133: C Head 134: K Head
Description: After turning ON the power or when cover is closed, the sensor detects that the unit is missing.
Remedy: 1) Is an Error message displayed? 2) Is the LED head properly mounted? 3) Does the Error take place again? Check the LED head unit. Turn ON power again. Replace the LED head Assy.
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again? Turn ON power again. Confirm that the Y, M, and C ID units are in position, and reboot.
Display: Service Call 144: Y ID 145: M ID 146: C ID 147: K ID
Description: This is indicated when the toner feed switch error or the toner lock-lever-open error occurs repeatedly when new toner is used.
Remedy: 1) Is the toner lock-lever-open error indicated? 2) Does the problem persist even if the ID units are replaced? Confirm that the lever is in position. Replace the toner feed unit. Replace the ID units.
Display: Service Call 160: Y Toner 161: M Toner 162: C Toner 163: K Toner
Description: Toner sensor detected error.
Remedy: 1) Is an Error message displayed? 2) Does the Error take place again? Replace toner sensor or Assy (SGG-PCB). Replace toner sensor or Assy (SGG-PCB).
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.