Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI proColor C930 — Trang 8/11

Code: 231

Display: Service Call 231: Error
Description: RFID Reader I/F Error
An interface error was detected with the RFID reader device.
01: communication error between the RFID reader and the engine PCB.
02: the transceiver circuit error of the RFID reader.
03: communication error between the RFID reader and the Toner cartridge.
04: the Toner cartridge detection error (more than 4).
Remedy: 01: Same action as for error 230 02: Replace the RFID R/W board. 03: Check the connection of the antenna cable. 04: Check to confirm that the number of Toner cartridge is correct.

Code: 240 ... 245

Display: Service Call 240: Error to 245: Error
247: Error 248: Error
Description: Engine Program Memory Error
240 :Flash-memory hardware error 241 :Duplex flash-memory error 242 :Optional tray-2 flash-memory error 243:Optional tray-3 flash-memory error 244 :Optional tray-4 flash-memory error 245 :Optional tray-5 flash-memory error 247 :Sub-CPU flash-memory error 248 :Inverter flash-memory error
Remedy: If the error still occurs after rebooting, replace the circuit board of the relevant unit.

Code: 247, 248

Display: Service Call 240: Error to 245: Error
247: Error 248: Error
Description: Engine Program Memory Error
240 :Flash-memory hardware error 241 :Duplex flash-memory error 242 :Optional tray-2 flash-memory error 243:Optional tray-3 flash-memory error 244 :Optional tray-4 flash-memory error 245 :Optional tray-5 flash-memory error 247 :Sub-CPU flash-memory error 248 :Inverter flash-memory error
Remedy: If the error still occurs after rebooting, replace the circuit board of the relevant unit.

Code: 250

Display: Service Call 250: Error
Description: Secure File Erasing Error
The printer detected a secure-file erasure error.
Remedy: The printer detected a secure-file erasure error. Erase contents of HDD completely by using the disk erase function (HDD ERASE).

Code: 251

Display: Service Call 251: Error
Description: Secure Disk Erasing Error
The printer detected an error during data erasure on its HDD.
Remedy:

Code: 910 ... 914

Display: Power Off/on 910: Error to 914: Error
Description: GDDC Error
910 :Tray1 GDDC Error 911 :Tray2 GDDC Error 912 :Tray3 GDDC Error 913 :Tray4 GDDC Error 914 :Tray3 GDDC Error
Remedy: Check to confirm that the tray is mounted correctly. Replace the geared motor of the tray.

Code: 917

Display: Power Off/on 917: Error
Description: Belt Slit Sensor Error
Remedy: The belt is not running properly. Does the error message still appear after rebooting? Yes Check to confirm that the belt is mounted correctly. Replace the belt.

Code: 918

Display: Power Off/on 918: Error
Description: Duplex FAN0 Alarm Detection
Remedy: Error of the fan in the duplex unit Does the error still occur after rebooting?
Check to confirm that the duplex unit is mounted correctly. Check the connection of the fan. Replace the fan.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie