Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh A199 Aficio Color 5106 Lily — Trang 7/12

Code: SC405

Description: Transfer belt position abnormal - Definition - [B] The transfer belt is positioned to touch the drum in the following conditions: Belt and drum cleaning completed after the main switch is turned on Belt and drum cleaning completed after a paper jam is removed Copy job completed
Causes: • Transfer belt position sensor defective • Transfer belt position clutch defective • Interface board 1 defective • Main control board defective

Code: SC406

Description: Transfer roller position abnormal - Definition - [B] The transfer roller is positioned to touch the transfer belt in the following conditions: Belt and drum cleaning completed after the main switch is turned on Belt and drum cleaning completed after a paper jam is removed Copy job completed
Causes: • Transfer roller position sensor defective • Transfer roller position clutch defective • Interface board 2 defective • Main control board defective

Code: SC411

Description: Paper discharge leak - Definition - [B] A paper discharge leak signal is detected for more than 3 seconds.
Causes: • Paper discharge plate is touching a conductive foreign object • High voltage supply board - D defective

Code: SC420

Description: Cleaning motor lock - Definition - [B] The cleaning motor lock signal is detected for more than 3 seconds.
Causes: • Cleaning motor defective or poor connection • Interface board 1 defective or poor connection (CN710)

Code: SC422

Description: PCC leak - Definition - [B] A PCC leak signal is detected for more than 3 seconds.
Causes: • PCC end block damaged • High voltage supply board - T1/PCC/BR defective

Code: SC440

Description: Drum motor lock - Definition - [B] The drum motor lock signal is detected for more than 3 seconds.
Causes: • Too much load on the drum drive mechanism • Drum motor defective or poor connection • Interface board 1 defective or poor connection (CN708) • Main control board defective

Code: SC500

Description: Transport motor lock - Definition - [B] The transport motor lock signal is detected for more than 3 seconds.
Causes: • Too much load on the transport unit, fusing unit, transfer roller unit, or transfer belt cleaning unit • Transport motor defective or poor connection • Interface board 2 defective or poor connection (CN806) • Main control board defective

Code: SC502

Description: 1st tray lift motor abnormal - Definition - [C] The lift sensor is not activated within 10 seconds after the lift motor starts turning. The SC message for level C is displayed when this condition is detected twice.
Causes: • Lift sensor defective • Tray lift motor defective or poor connection • Paper feed interface board defective or poor connection (CN906) • Main control board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie