Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh A199 Aficio Color 5106 Lily — Trang 8/12

Code: SC503

Description: 2nd tray lift motor abnormal - Definition - [C] The lift sensor is not activated within 10 seconds after the lift motor starts turning. The SC message for level C is displayed when this condition is detected twice.
Causes: • Lift sensor defective • Tray lift motor defective or poor connection • Paper feed interface board defective or poor connection (CN906) • Main control board defective

Code: SC504

Description: 3rd tray lift motor abnormal - Definition - [C] The lift sensor is not activated within 10 seconds after the lift motor starts turning. The SC message for level C is displayed when this condition is detected twice.
Causes: • Lift sensor defective • Tray lift motor defective or poor connection • Paper feed interface board defective or poor connection (CN906) • Main control board defective

Code: SC510

Description: Paper feed motor abnormal - Definition - [B] The paper feed motor lock signal is detected for more than 3 seconds.
Causes: • Too much load on the paper feed mechanism • Paper feed motor defective or poor connection • Paper feed interface board defective or poor connection (CN910) • Main control board defective

Code: SC541

Description: Fusing (hot roller) thermistor open - Definition - [A] The output of the fusing (hot roller) thermistor goes to 5 V, corresponding to 0°C.
Causes: • Fusing (hot roller) thermistor open • Fusing unit not installed • Main control board defective

Code: SC542

Description: Fusing (hot roller) warm-up error - Definition - [A] The fusing (hot roller) temperature does not reach the ready temperature within 12 minutes after the main switch is turned on.
Causes: • Fusing (hot roller) thermistor not in position • Fusing (hot roller) lamp open • Fusing (hot roller) thermistor defective • Main control board defective

Code: SC543

Description: Fusing (hot roller) overheat - Definition - [A] A fusing (hot roller) temperature of over 200°C is detected 5 times (within 5 seconds).
Causes: • Fusing (hot roller) thermistor defective • AC drive board defective (triac) • Main control board defective

Code: SC544

Description: Fusing (hot roller) low temperature abnormal - Definition - [A] A fusing (hot roller) temperature of below 90°C is detected 6 times (within 6 seconds) after warm-up is completed.
Causes: • Fusing (hot roller) thermistor defective • AC drive board defective • Main control board defective • Fusing (hot roller) thermistor not in position • Fusing (hot roller) lamp open

Code: SC545

Description: Fusing (hot roller) ready temperature abnormal - Definition - [A] Fusing (hot roller) temperature goes below the ready temperature (10°C below the control temperature) after warm-up is completed, and it does not reach the ready temperature within 6 minutes.
Causes: • Fusing (hot roller) thermistor defective • AC drive board defective • Main control board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie