Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh A199 Aficio Color 5106 Lily — Trang 11/12

Code: SC700

Description: DJF feed-in motor abnorma l- Definition - [D] The encoder pulse is not detected by the DJF main board under each motor on condition. The first time, an original jam occurs. The second time, an SC is displayed.
Causes: • DJF feed-in motor defective • DJF belt drive motor defective • DJF feed out motor defective

Code: SC701

Description: DJF belt drive motor abnormal - Definition - [D] The encoder pulse is not detected by the DJF main board under each motor on condition. The first time, an original jam occurs. The second time, an SC is displayed.
Causes: • DJF feed-in motor defective • DJF belt drive motor defective • DJF feed out motor defective

Code: SC702

Description: DJF feed out motor abnormal - Definition - [D] The encoder pulse is not detected by the DJF main board under each motor on condition. The first time, an original jam occurs. The second time, an SC is displayed.
Causes: • DJF feed-in motor defective • DJF belt drive motor defective • DJF feed out motor defective

Code: SC703

Description: Size detection encoder pulse error - Definition - [C] The encoder pulse from the pull-out roller is not detected by the DJF main board. The first original jam will not display an SC. The second jam, however, will display an SC code.
Causes: • Pulse generator defective • Original length detection error • Original has slipped

Code: SC704

Description: DJF friction belt motor abnormal - Definition - [D] The encoder pulse is not detected by the DJF main board under the friction belt motor on condition. The first original jam will not display an SC. The second jam, however, will display an SC code.
Causes: • Friction belt turn sensor defective • Friction belt motor defective • Pulse generator defective • Some tension has been applied to the friction belt

Code: SC730

Description: Sorter motor abnormal - Definition - [B] The encoder pulse is not detected by the sorter control board for 200 ms after the sorter motor starts. A paper jam indication is displayed the first time. An SC is displayed the second time.
Causes: • Sorter motor defective

Code: SC790

Description: Projector lamp does not turn on - Definition - [C] The projector lamp does not turn on 100 ms after 10 V (or more) is applied to the lamp.
Causes: • Projector lamp open • Thermofuse blown

Code: SC791

Description: Projector lamp does not turn off - Definition - [C] The projector lamp stays on when it should turn off.
Causes: • Projector lamp regulator defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie